How to Use

A. Using the TV Dock

1. Connect power.Note: Use the Switch adapter or a PD adapter rated above 39W.
2. Plug one end of the HDMI cable into the HDMI port on the Plantdock, and the other end into an HDMI port on your TV.
3. Turn on the console and slide it onto the docking slot. The console screen will display on the TV.
   1. Note 1: If the console screen doesn’t appear, ensure the correct HDMI input is selected on your TV.
   2. Note 2: Use the NS original HDMI cable or another known working HDMI cable.
   3. Note 3: After setup, allow 5 seconds for normal operation.
4. The dock charges the console in TV mode.Light Indicator:
   1. Projection Status: Flower head lights glow White.
   2. Sleeping/Power OFF Mode: Flower head lights OFF.

B. Using USB Function

1. Connect power.Note: Use the Switch adapter or a PD adapter rated above 39W.
2. Pair a wireless controller using a USB cable.
3. Plug in a wired controller to play games.
4. Plug in your Pro controller or other USB device to recharge it.Note: The Plantdock shuts down automatically when not projecting or charging.

C. Using Joypad-Charging Holder

1. Connect power.Note: Use the Switch adapter or a PD adapter rated above 39W.
2. Slide the Joypad into the **charging slots**. The indicator lights up.
3. Charging Indicator:
   1. Charging: Glows Green.
   2. Fully Charged: Solid Blue.
   3. Power OFF: No light.