Independently tested for electrical safety, compatibility & environmental compliance.
Key Features
60W GaN Dock + Charger GaN power is built into the dock, reducing the separate hardware needed for a TV setup.
HDMI 2.1 Display Output Supports output up to 4K@120Hz when the source device, cable, display and selected mode are compatible.
AI Visual Adjustment The display chip adjusts HDR, HD or UHD output according to the connected display.
80% Smaller A foldable plug and compact body make the setup easier to carry and easier to fit on a desk.
Cross-Platform USB-C Support Designed for Switch 1/OLED and compatible with Steam Deck, ROG Ally, Samsung DeX, tablets and other supported USB-C devices.
Setup & Compatibility
STEP 1 Connect Cubedock to power and connect your compatible USB-C gaming device.
STEP 2 Connect HDMI to a compatible TV or monitor. Use the USB-A port for a supported controller, receiver, storage device or other accessory.
Video resolution and refresh rate depend on the source device, cable, display and selected mode. Not every USB-C device supports video output.
Cubedock combines the power adapter, display connection and accessory port in a body that is 80% smaller than the original Switch dock.
The Core System
Power. Picture. One brick.
60W GaN Power
Built-in GaN charging delivers efficient USB-C power while keeping the dock compact enough for everyday carry.
Cross-Platform USB-C
Connect compatible laptops, tablets, Steam Deck, ROG Ally and other supported USB-C devices through one compact setup.
AI HDMI 2.1
AI visual adjustment supports HDR, HD or UHD modes, with output up to 4K@120Hz when the source, cable and display are compatible.
Cubedock + Leaf Type-C 3.1 Cable
One setup, down to the last leaf.
A Cable with Character
The green Type-C 3.1 cable uses small leaf details to complete the brick-inspired Powkong setup instead of looking like another generic cable.
10Gbps Type-C 3.1
The included cable supports up to 10Gbps transfer capability for a stable connection between Cubedock and compatible USB-C devices.
Up to 240W PD Cable
The included cable supports up to 240W PD capability, while Cubedock delivers the 60W GaN power designed for this compact dock setup.
What is inside the brick
Charging
60W GaN USB-C PD
Display
HDMI 2.1 · up to 4K@120Hz*
Ports
USB-C · HDMI 2.1 · USB-A 3.0
Included Cable
Type-C 3.1 · 10Gbps · up to 240W PD
Input
100-240V global voltage
Plug
Foldable · regional variants
Primary Systems
Switch 1 · Switch OLED
Other Devices
Steam Deck · ROG Ally · Samsung DeX
Visual Processing
AI adjustment · HDR / HD / UHD · DSC + BRR
Form
Dock · Charger · Hub · 80% smaller
One brick or the full dock setup?
CubedockTraditional Dock Setup
Travel Load✓ Dock, charger and hub together✗ Separate dock and power adapter
Footprint✓ 80% smaller✗ Full-size fixed setup
Display✓ HDMI 2.1 with AI adjustment✗ Depends on separate dock hardware
Character✓ Brick-inspired Powkong design✗ Standard utility hardware
FAQ
Good to know before you buy.
Which consoles and devices are compatible?
Cubedock is designed for Switch 1 and Switch OLED. It can also work with compatible Steam Deck, ROG Ally, Samsung DeX, tablets and other USB-C devices. The connected device must support the required charging or video-output mode.
Will every device output 4K@120Hz?
No. 4K@120Hz is the maximum supported output. Actual resolution and refresh rate depend on the source device, cable, display and selected mode.
What comes in the box?
The package includes the Cubedock Brick and a green leaf-detailed Type-C 3.1 cable with 10Gbps transfer capability and support for up to 240W PD. Plug format depends on the regional variant selected on the product page.
Can I use it while travelling?
The 100-240V input and foldable plug are designed for travel. Select the plug variant that matches your destination and use a compliant local adapter when required.
